working on a 1995 Hyundia oil pump problem

Discussion in 'General Motoring' started by loyalspirit, Sep 29, 2005.

  1. loyalspirit

    loyalspirit Guest

    Hi I'm working on a 1995 Hyundia Elantra with a
    1.6l dohc and the people got it from say that after the engine got hot
    the
    oil pump would stop
    pumping oil I have the pump off the car now and
    have look at both the drive gear and the driven
    gear they both look fine, and all the oil holes
    are open,so can you please give me some idea, I
    was thinking could the relief plunger in the oil
    filter brackit could this stop the oil pump from
    pumping after it get hot.
     
    loyalspirit, Sep 29, 2005
    #1
  2. loyalspirit

    hyundaitech Guest

    The plunger could be sticking in the bore when it gets hot, causing your
    oil pressure to be lost. I've never seen this, but I've heard of it
    happenning.
     
    hyundaitech, Sep 30, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1995 Hyundai Sonata Trans and wheel bearing? Problem

  2. 1995 Elantra GLS Oil problem

  3. 1995 ELANTRA SE IDLE PROBLEM

  4. 1995 Hyundai Charging system problem

  5. 1995 hyundai sonata problem

  6. removing oil pump on 1995 Hyundia Elantra

  7. Strange problem with EXCEL 1.3 (year: 1995)

  8. 1995 hyundia fuel pump

Loading...