Wiper Arm Problem

Discussion in 'Hyundai Elantra / Lantra' started by Doug A, Oct 11, 2016.

  1. Doug A

    Doug A

    Joined:
    Oct 11, 2016
    Messages:
    2
    Likes Received:
    0
    Had to install a new wiper motor. I removed the wiper arms and the motor. Reinstalled the new motor. When I went to put the wiper arms back on they wouldn't work properly. Like they wanted to go down into the engine compartment. I tried to adjust them up into the windshield more but they still wouldn't start from the bottom and go to the top. They would still want to only move a little and towards the engine.

    Is there something I'm missing. Alignment in positioning somewhere. I have no idea. It should be pretty simple but I'm at a loss here.

    Confused.

    Thanks
     
    Doug A, Oct 11, 2016
    #1
  2. Doug A

    Doug A

    Joined:
    Oct 11, 2016
    Messages:
    2
    Likes Received:
    0
    Sorry I forgot to mention this is on a 2013 Elentra Limited
     
    Doug A, Oct 13, 2016
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Who is familiar with control arm problems?

  2. 2000 Hyundai Accent windshield wiper problem

  3. Wiper problem

  4. Santa Fe - Front Centre Arm Rest Lid Removal

  5. 2001 Elantra driver's side arm rest - need replacement

  6. 06 Sonata GLS timing tensioner serviced, now alarm doesn't arm

  7. 2002 Elantra - Rear Trailing Arm Bolt Broke

  8. Arm rest

Loading...