Trunk release won't

Discussion in 'General Motoring' started by Richard Steinfeld, Apr 22, 2005.

  1. 2000 Sonata:
    My remote trunk release no longer works. This has nothing to do
    with the release lockout mechanism on the trunk lid. I pull the
    handle by the driver's seat, and nothing happens -- I need to use
    the key to get the trunk open.

    How does this remote release work? There's nothing visible to me.
    Is it electric or mechanical? I'm thinking electric on the lid
    latch unit because I can't see anything mechanical on the fixed
    part ("hasp?").

    Richard
     
    Richard Steinfeld, Apr 22, 2005
    #1
  2. Richard Steinfeld

    hyundaitech Guest

    If you've got a lever on the floor, it's cable operated. If you've got a
    switch on the door, it's electric with a solenoid attached to the latch.
     
    hyundaitech, Apr 22, 2005
    #2
  3. | If you've got a lever on the floor, it's cable operated. If
    you've got a
    | switch on the door, it's electric with a solenoid attached to
    the latch.
    |

    It's a lever on the floor.
    Are there any typical failure modes -- places where the cable
    breaks, etc?

    Thanks.

    Richard
     
    Richard Steinfeld, Apr 23, 2005
    #3
  4. Richard Steinfeld

    hyundaitech Guest

    I've actually never seen this cable fail on a Hyundai. Most cables break
    near either end. You'll want to pull up the lever and check the latch to
    make sure the cable is attached. It's also possible there's a problem
    with the latch or lever.
     
    hyundaitech, Apr 25, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.