Sonata 2002 Auto Gear Change

Discussion in 'Hyundai Sonata' started by NickNike, Oct 4, 2005.

  1. NickNike

    NickNike Guest

    I have the 2002 model Sonata 2.7 V6 automatic in the UK. When I first drive
    off, the gear change is smooth except with the first change from second to
    third which is a bit 'clunky'. After this first change, all subsequent
    changes up to third are smooth. All other changes are smooth. Not exactly
    the most worrying thing that can go wrong, but it is noticeable. Anyone know
    why only the first change to third should do this?
    nick
     
    NickNike, Oct 4, 2005
    #1
  2. NickNike

    hyundaitech Guest

    There's a reprogram for the TCM for U.S. models which addresses a shift
    flare on the 2-3 shift. You should probably check with your local Hyundai
    service center to see if the same issue is present in UK.
     
    hyundaitech, Oct 5, 2005
    #2
  3. NickNike

    NickNike Guest

    Thanks for the reply. Would this tend to effect every shift as opposed to
    just the first time it shifts from 2-3,
    thanks,
    nick
     
    NickNike, Oct 5, 2005
    #3
  4. NickNike

    hyundaitech Guest

    I've seen it both ways, actually. I worked on a 2002 or 2003 Kia Optima
    (same basic car) when I was employed at a Kia dealer and it had pretty
    much the issue you describe. I don't think the reprograms were available
    at that time, however.
     
    hyundaitech, Oct 5, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.