Obd II Protocol

Discussion in 'General Motoring' started by Partner, Jan 13, 2007.

  1. Partner

    Partner Guest

    Does anyone know if any of the new Hyundai's uses the CAN OBD II protocol?
    I thought my 2007 Sonata did but my scan tool seems to be telling me its
    KWP2000. Its difficult to tell because they whip by so fast but it looks
    like KWP is the last one tested. It does show the VIN number, which is new
    from my 2003. I thought that I had read where the NF Sonata used a
    networked system.

    --
     
    Partner, Jan 13, 2007
    #1
  2. You may find what you need on the HMA service web site. www.hmaservice.com
    If you don't have one, get a free account there. They do give some OBD-II
    information, but I'm not familiar with scan tools so I don't know if it is
    what you need.
     
    Edwin Pawlowski, Jan 13, 2007
    #2
  3. Partner

    hyundaitech Guest

    To my knowledge, the '06 and '07 Sonatas are only lightly networked, by
    which I mean that the computers communicate with each other only a small
    amount and command very little of each other. The '06 Accent was actually
    the onset of the CAN protocol for Hyundai. I believe '07 Elantra and
    Entourage are CAN as well.
     
    hyundaitech, Jan 17, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.