Is this a DIY ?

Discussion in 'General Motoring' started by DADEO, Jan 26, 2005.

  1. DADEO

    DADEO Guest

    2001 Hyundai Elantra. I want to replace the battery.I was told there are a
    few things needed to be removed first,I can't just remove a hold down
    clamp and 2 cables.Shucks,I was hopeing this was going to be a real easy
    1-2-3 job.Am I getting misinformation?Is this a easy job that even I
    should be able to do?What are the steps?I'm lucky I know how to open the
    hood,this site is a lifesaver.
     
    DADEO, Jan 26, 2005
    #1
  2. DADEO

    hyundaitech Guest

    There's a little plastic cover that will need to be removed. It's held in
    by three phillips-head push locks and one 10mm head bolt. Then you can
    remove the battery terminals (10mm) and hold down (12mm). You'll be able
    to figure this out.
     
    hyundaitech, Jan 26, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Has anyone had this problem with 2001 Sonata?

  2. Found this in the glove-box of our new Santa-Fe. Anyone know what this thing is? - Doohickey.jpg

  3. Spark plugs DIY questions on Sonata99

  4. Crank pulley bolt (Timing belt replacement DIY)

  5. Auto Trans Fluid - Flushing DIY

  6. DIY A/C Recharge kit for 2002 Sonata GLS

  7. 04 wheel stud problem diy

  8. DIY brake pad replacement in Elantra disc brakes

Loading...