ICV Valve

Hi!

Posted a question a couple of days ago, about Oil consumption in my Accent.

Someone mentioned a defect ICV valve could be one of the causes of excess
oil burning.
Is there any possible thing I could do to check this valve, if it's OK or
not?

Btw...when looking under the hood at idle, I noticed a relatively loud
hizzing noise (like something is leaking air) around the
carburettor...thing.
When revving up, it diminishes a bit. Normal or what?

Thanx
FC

 

Forgot to mention....driving Accent 1,5 -96 mod.

FC

 

Jody mentioned the PCV valve. Is this what you mean?

The PCV valve screws into the valve cover and has a hose leading from it
to the intake manifold. It's purpose is to remove pressurized vapors from
the crankcase while the manifold sucks them into the engine with new air to
be combusted with the air fuel mixture. There's also a breather hose which
runs from the air intake hose to the valve cover which allows fresh air to
be sucked into the crankcase. If this system does not operate properly,
it can cause excessive crankcase pressure, and encourage leaks and
excessive oil consumption.

You'll want to check the PCV hose, breather hose, and PCV valve itself.
Check the breather hose to verify it's not kinked or clogged. Check the
PCV hose to be sure it's not kinked or clogged, has no leaks, and that it
does not suck shut when the engine is running. To check the PCV valve,
you should check to make sure air can be sucked in the direction of the
intake manifold, but not back into the engine crankcase.

 

Of course....PCV is what I mean
FC

 

In addition to checking the PCV/breather system, check to see that all
the hoses under the hood are connected to something and are not damaged.
The hissing you hear could be a vacuum hose that's broken or disconnected.