hyundia coupe f2

wahser bottle problems there is a little water coming out of the nosel on
the bonnett the motor is working ok the the rear water works fine but at
the front ive dicomnnect from under the bonnet and there is only a littl
water comes out slowly ive blown down the pipe and the water bubbles up in
the bottle. how can i check all the tubes and how do i get acces to them
please help

kind regards jay

 

Reply to message from "jaykatowen" <> (Mon, 04 Dec
2006 16:22:36) about "hyundia coupe f2":

j> wahser bottle problems there is a little water coming out of the nosel
j> on the bonnett

Jay

Have you checked the nozzles themselves? They could be (partially) blocked.

Take a straight pin and poke it carefully into the holes in the nozzles,
and then try to spray.

Best Regards
Wayne Moses <> Mon, 04 Dec 2006 18:30:40 -0600

=== Posted with Qusnetsoft NewsReader 3.3

 

Usually, the washer hoses run inside the right fender. To access, you'll
need to remove the fender liner.