door panel removal

Discussion in 'General Motoring' started by BRose, Feb 3, 2006.

  1. BRose

    BRose Guest

    How do you get the door panel off the 2003 Tiburon. I wanted to ask
    before I started pulling on it and broke something. Thanks.

    -Billy
     
    BRose, Feb 3, 2006
    #1
  2. BRose

    hyundaitech Guest

    The cover pops off the door grip handle to expose a few screws. If I
    recall correctly, there is also a screw behind the window switch. All
    the
    others should be evident.
     
    hyundaitech, Feb 3, 2006
    #2
  3. BRose

    hyundaitech Guest

    I did one of these today. There's nothing of consequence behind the window
    switch. There are three screws behind the pull grip, one in the door
    handle, two at the front of the door panel and three at the rear. Pry the
    triangular top corner trim off evenly around. Remove the door handle
    bezel. Pull out on the bottom of the door panel and slide up off the
    door. Unplug the harnesses and the whole thing is now free.
     
    hyundaitech, Feb 4, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. NEED HELP WITH DOOR PANEL ON 04 ACCENT

  2. Question on Taking a Door Panel off

  3. 2006 Hyundai Accent - 4 Door and 3 Door Hatchback

  4. door panel removal

  5. Door panels on a 1999 1.5 Accent 2 door sport

  6. 02 Santa Fe door panel removal

  7. 2001 door power door lock dont work

  8. Tucson door panel removal

Loading...