aux light hookup

Discussion in 'General Motoring' started by lmcclaf, Jun 18, 2008.

  1. lmcclaf

    lmcclaf Guest

    One son has a 95 Scoupe and the other son has a 96 Accent. Since both
    cars are small and built low to the ground the headlights are not the
    greatest when in high beam. They each picked up a set of aux lights
    dirt cheap (35W each light) which work great for providing the extra
    bit of light they want. In the past when wiring in aux lights I put
    the relay on the high beam so the aux lights will come on with the
    high beam. However in both the Scoupe and the Accent the daytime
    running lights are a reduced high beam light so putting a relay in
    there won't work as desired. Any suggestions as to where a tap can be
    taken off to work the aux lights with the high beam lights would be
    appreciated. TIA

    Cheers,
    Lawrence
     
    lmcclaf, Jun 18, 2008
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.