attn Hyundaitech, are these TSBs covered by the powertrain warranty?

Discussion in 'General Motoring' started by Thee Chicago Wolf, Apr 15, 2008.

  1. HT,

    The last time I was at my dealership to have my tranny flushed and
    serviced I brought in a bunch of TSB related to the transmission
    having issues. It would basically rev up high before shifting into 2nd
    or 3rd and then engage. The service manager said it wasn't related and
    didn't need fixing or if it DID, it was related to the speed sensor.
    This sounded like BS to me then and still does.

    A few months back I happened to read about TSBs 07-40-009-1 and
    07-40-0010. These sure seem like they are the exact things I have been
    experiencing and brought to the attention of the service manager the
    last time I was there. Shouldn't having these shifting problems be
    covered under the powertrain warranty or at the least be serviceable
    by my dealership?

    - Thee Chicago Wolf
     
    Thee Chicago Wolf, Apr 15, 2008
    #1
  2. Thee Chicago Wolf

    hyundaitech Guest

    Not sure what TSBs you showed the dealer previously, but 07-40-009-1 an
    07-40-010 have little new in them. They're basically old TSBs redone t
    utilize the newer diagnostic equipment. Their purpose is to equip th
    technician with the information to properly diagnose a harsh engagement o
    a harsh shift. The warrantability depends on the item causing the problem
    Keep in mind that "normal operation" is one possible conclusion based o
    these TSBs.

    The warranties will be as follows:
    Transmission: 10/100 (powertrain)
    PCM: 8/80 (federally mandated emissions)
    TCM: 5/60 (bumper-to-bumper)
    Normal: none (no defect).

    If the shop goes through the procedure in the TSB, you should expect tha
    the diagnosis will be covered if the faulty part is still covered.
    Otherwise, you should expect to pay for the diagnostic expense.

    I'll say that none of these TSBs relate to anything having to do with
    speed sensor. I'll also say that very rarely is the computer (PCM or TCM
    the issue. In my experience, the most common finding is a defectiv
    transmission, followed distantly by normal operation. I don't recall eve
    seeing a defective computer actually cause a harsh engagement or shift, bu
    do agree it's possible.

    I find the statement "wasn't related and
    didn't need fixing or if it DID, it was related to the speed sensor"
    little odd. Exactly how is the service manager able to associate
    something that doesn't need fixing (normal condition) to what it is tha
    might need to be fixed. Sounds like BS to me, too. If it's normal, sa
    so. If it isn't say so.

    If you're interested, I can tell you whether you have a PCM (powertrai
    control module) or separate TCM (transmission control module) if you le
    me know the year of your Sonata and which engine it has
     
    hyundaitech, Apr 16, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.