Accent Crankshaft Pully

Discussion in 'Hyundai Accent' started by Joe and Linda Faber, Nov 12, 2007.

  1. Joe and Linda Faber

    Joe and Linda Faber Guest

    I have a 2002 Accent and can't seem to get the crankshaft pulley off to
    change the timing belt. Is it reverse threaded? Any tips or hints on this
    would be very appreciated.
     
    Joe and Linda Faber, Nov 12, 2007
    #1
  2. Joe and Linda Faber

    hyundaitech Guest

    It's threaded regularly, but tight. You'll either need an impact gun to
    take it loose, or you'll need to block the flywheel in order to keep the
    engine from turning.
     
    hyundaitech, Nov 12, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Accent??

  2. Accent driver's report

  3. do I need a puller to get crank pully off?

  4. Crankshaft Pulley Bolt

  5. Santa Fe Crankshaft seal failure

  6. 2003 Elantra needs crankshaft and seal replaced.

  7. '03 Santa Fe - special tool to hold crank pully while unbolting it?

  8. '03 Santa Fe Crank Shaft Pully doesn't have Left Hand threads, right?

Loading...