2000 Elantra Codes

Discussion in 'Hyundai Elantra / Lantra' started by Stephen, Jul 30, 2006.

  1. Stephen

    Stephen Guest

    Im getting codes 734, 733, 722, and 717. i know 722 is the output shaft
    speed sensor and 717 is the turbine shaft speed sensor. if i replace the 2
    sensors does the computer have to get reprogramed or can i just replace the
    2 sensors. also doesnt any1 know the part numbers for the 2 parts.


    thanks
    stephen
     
    Stephen, Jul 30, 2006
    #1
  2. Stephen

    hyundaitech Guest

    The input and output speed sensors come together. Hyundai calls them
    pulse
    generators. You should be able to purchase from any Hyundai dealer with
    no
    problem. Once you've replaced them, clear the codes by disconnecting the
    battery for 30 seconds.
     
    hyundaitech, Jul 31, 2006
    #2
  3. Stephen

    Stephen Guest

    i know how to clear the codes but does the computer have tbe reprogramed
     
    Stephen, Jul 31, 2006
    #3
  4. Stephen

    hyundaitech Guest

    No, you won't need to reprogram anything.
     
    hyundaitech, Jul 31, 2006
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. where besides dealer can I take Hyundai Elentra (99) to check codes?

  2. Helpl me make sense of these codes?

  3. Codes

  4. Engine Codes from data port - odd results

  5. 1992 Elantra: How can I read the Engine Control Unit Codes?

  6. engine codes for 2000 Accent

  7. 98 Hyundai Elantra OBD II Codes

  8. Sonata 2000 1166 and 1167 codes

Loading...