1999 Sonata Glove Box / AC fan blower motor question

Discussion in 'Hyundai Sonata' started by fullquiver11, Oct 14, 2006.

  1. fullquiver11

    fullquiver11 Guest

    I am having problems trying to remove my glove box to reach the AC fan
    motor to replace it. I have removed the 4 bolts holding the glove box
    in (per the on-line manual). It will not pull down and out. Any
    suggestions? Also any suggestions on when I reach the blower motor?
    MANY Thanks!
     
    fullquiver11, Oct 14, 2006
    #1
  2. fullquiver11

    hyundaitech Guest

    You don't need to remove the glove box to get the blower motor out. You
    should remove the right side under-dash cover (if you have one) and then
    unscrew the three screws holding the blower in the bottom of the heater
    assembly. You'll probably need to move some wiring and may need to unbolt
    a couple items to get them out of your way.
     
    hyundaitech, Oct 14, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Found this in the glove-box of our new Santa-Fe. Anyone know what this thing is? - Doohickey.jpg

  2. How to remove glove box in Accent 2001?

  3. 2004 Santa Fe Visor Vanity Lights/Glove Box light

  4. What's the Trick? -- Sonata Blower Fan Switch

  5. 01 Sonata AC blower motor

  6. Buzzing glove box

  7. How to fix glove box latch handle noise?

  8. Those dang glove box clips/stops...

Loading...