03 tiburon interior

Discussion in 'Hyundai Coupe / Tiburon' started by customtib03, Jan 26, 2007.

  1. customtib03

    customtib03 Guest

    Alright so i have been able to take apart mostly everything on the
    inside in my quest to mod this car, except the dang door panels. i
    got all the screws out and started to pull and gently pry, but man it
    feels like there are more screws holding them on right around the oh
    Sh** handle on the door. (and i hate to just yank the thing out
    thinking they are pop ins and break something) are they just some
    serious pop ins on the middle or are there hidden screws. thanks in
    advanced to anyone who can help.
     
    customtib03, Jan 26, 2007
    #1
  2. customtib03

    Hyundaitech Guest

    The door grip handle comes apart. I usually slip a screwdriver
    between the top of the grip handle and the bezel for the interior door
    handle and pry outward
     
    Hyundaitech, Jan 26, 2007
    #2
  3. customtib03

    Wayne Moses Guest

    Reply to message from customtib03 <> (Thu, 25 Jan 2007 21:27:
    44) about "03 tiburon interior":

    c> Alright so i have been able to take apart mostly everything on the
    c> inside in my quest to mod this car,

    What are you planning to do once you have gutted the insides?

    Best Regards
    Wayne Moses <> Fri, 26 Jan 2007 20:48:16 -0600

    === Posted with Qusnetsoft NewsReader 3.3
     
    Wayne Moses, Jan 27, 2007
    #3
  4. customtib03

    customtib03 Guest

    well the trunk came apart for all the fat mat i put down and the dash
    came apart for the neons i mounted in the foot wells, deck, and the
    ipod mount. the seats came up for the other neons adn more fat mat,
    but id like to put new speakers in the doors and fat mat the doors as
    well. oh and if you were wondering, everything is alpine, deck, type
    r int eh doors and the rears, and type r subs and amps to puch it all.
    when i get most of the interior done ill post pictures and even give
    some step by steps on some of the stuff i did and how i got things
    apart if anyone needs them
     
    customtib03, Jan 28, 2007
    #4
  5. customtib03

    Wayne Moses Guest

    Reply to message from customtib03 <> (Sat, 27 Jan 2007 22:25:
    19) about "Re: Re: 03 tiburon interior":

    c> well the trunk came apart for all the fat mat i put down and the dash
    c> came apart for the neons i mounted in the foot wells, deck, and the
    c> ipod mount. the seats came up for the other neons adn more fat mat, but
    c> id like to put new speakers in the doors and fat mat the doors as well.
    c> oh and if you were wondering, everything is alpine, deck, type r int eh
    c> doors and the rears, and type r subs and amps to puch it all. when i
    c> get most of the interior done ill post pictures and even give some step
    c> by steps on some of the stuff i did and how i got things apart if
    c> anyone needs them.

    That's a lot of work. Good for you - its your baby and when you are
    finished it will be totally unique.

    Planning on showing it? Any performance mods?

    Best Regards
    Wayne Moses <> Sun, 28 Jan 2007 10:09:57 -0600

    === Posted with Qusnetsoft NewsReader 3.3
     
    Wayne Moses, Jan 28, 2007
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.